How Commercial Doors Differs From Residential Doors

There are some critical differences between a residential door and a commercial door. While both are generally secure, commercial doors require different hardware and less clearance. They are also generally more significant and require more durable hinges. The main benefit of a commercial door is that it has a more durable lock and better security.


Commercial doors are typically thicker and sturdier than residential doors, just like the commercial new doors apple valley. They also typically come in a broader range of styles, from stately wood to clear glass. The difference between residential and commercial doors comes down to security and durability, but the price can also be a factor. While residential doors are typically less expensive, you should still invest in a good-quality commercial door.

This is simple: commercial doors must withstand much more abuse than residential ones. In addition to requiring a much heavier construction, commercial doors must be dent-resistant and may require insulating features. In addition, commercial doors are more extensive than residential doors.

While residential doors tend to wear out quickly, commercial doors can last for many years with proper installation. Many ordinary door issues can be easily fixed by replacing damaged parts or fixing the door’s position in the frame.

Offer Superior Security

An excellent technique to increase a building’s security is ventilated business doors. They make an excellent choice for enterprises operating in a variety of settings. Office complexes, dining establishments, and retail stores are common examples. These doors are available in a variety of types and styles. Some have a combination of grilles and doors, while others feature perforated curved or flat slats.

Ventilated roll-up doors offer exceptional protection for both inside and outside buildings. Not only do they provide a superior barrier to theft and vandalism, but they also maintain a constant temperature inside the building. This helps reduce the strain on HVAC systems. These doors also require minimal maintenance, which means fewer service calls and maintenance costs.

Require Less Clearance

Commercial doors have clearance requirements that are lower than those of residential doors. These clearance requirements are measured from the face of the door to the end of the frame when the door is fully opened to 90 degrees. Commercial doors must also have minimal thresholds, which can be as low as half an inch.

When determining the clearance requirements for a storefront door, you should keep in mind that most are recessed into the building. This means that the wall nearest the door must only project up to eight inches from the face of the door. The same goes for structural columns located near the door. In addition, any obstruction must be at least eight inches from the latch side.

Commercial doors are also much more significant than residential doors. A typical loading dock door will be 8’6″ wide. It will have heavy forklift traffic and may be more susceptible to collisions than a residential door.

Require More Durable Hinges

If your commercial building is in a harsh climate, you should consider purchasing hinges of higher-quality steel. This material can withstand extreme temperatures and corrosive environments. In addition, these hinges are more economical than other types.

Manufacturers manufacture corrosion-resistant, stainless steel pin and barrel continuous hinges, making them an excellent choice for exterior doors. They are also more resistant to moisture and snow, which can cause problems with other types of hinges. Pivot hinges are also good choices for exterior doors. However, they tend to rust at the bottom, meaning they need to be replaced more often. Additionally, the door should also be equipped with aluminium door kick plates to protect the lower part.

Commercial doors are heavier and need more durable hinges. The hinges that support these doors need to handle the high weight and frequency of rotation. They should be made from heavy-duty materials which can withstand high foot traffic and extreme weather conditions. In addition to steel and aluminum, commercial doors are usually made from wood and other materials that withstand frequent wear and tear. Choosing the wrong hinge can lead to problems like unsecured entryways, failure to meet fire codes, and high repair costs.